Repair the Concrete

• Fill cracks with epoxy or polyurea crack filler

• Patch holes, pitting, or spalling areas

• Grind or sand repaired areas smooth after curing

2. Surface Preparation (Critical Step)

• Mechanically grind the concrete (preferred method) to create a proper surface profile

• Alternatively, acid etch (less consistent and less durable)

• Ensure the surface feels like medium-grit sandpaper (CSP-2 to CSP-3)

3. Apply Primer / Base Coat

• Mix epoxy resin and hardener according to manufacturer specifications

• Cut in edges with a brush

• Roll the coating evenly across the floor in sections

• Maintain a wet edge and work within the product’s pot life

4. Broadcast Decorative Flakes (Optional)

• While the base coat is still wet, broadcast vinyl flakes

• Coverage can be light, medium, or full broadcast depending on desired finish

• Allow the floor to fully cure

5. Scrape and Clean (if flakes are used)

• Scrape the surface to remove loose or excess flakes

• Vacuum thoroughly to ensure a clean surface for topcoat

6. Apply Topcoat / Sealer

• Apply a clear topcoat (epoxy, polyurethane, or polyaspartic)

• Optionally add anti-slip aggregate

• Ensure even coverage for durability and appearance

7. Cure and Return to Service

• Light foot traffic: ~24 hours

• Vehicle traffic: 48–72 hours (varies by system)

Getting started is simple. Reach out through our contact form or schedule a call—we’ll walk you through the next steps and answer any questions along the way.

You can reach us anytime by phone at 401-317-0682 or email at barringtonepoxy@gmail.com. We aim to respond quickly—usually within one business day.

We have a several resinous polymer formulations of epoxy, polyurea, polyaspartic. This allows us to address various concrete, temperature, and humidity conditions as well as offer different aesthetic attributes in our decorative coatings systems.

It is the homeowner’s responsibility to remove all contents. We can provide a tent shelter at no-cost or you can store items uder a tarp. If you need help clearing the space we can recommend “helpers” through companies like Task Rabbit.

No, we use stand-alone electrical generators to power our equipment.

There is an odor depending on the solution applied but we will seal any entrances to the main house to reduce any infiltration into living spaces.

The grinding process does create dust but we use a dust capture system to minimize dust. We also will seal any entrences to the main living quarters to prevent dust infiltration.

We request 50% deposit upon contract execution. We accept cash and checks.

The floor installation takes two days. You can return your garage between 24-36 hours depending on weather conditions.

We offer flake, quartz, metalic, scape, and liquid colorant systems.

We use industry-leading materials for maximum performance:

• Epoxy Coatings – Strong, reliable foundation

• Polyurea Basecoats – Superior adhesion and flexibility

• Polyaspartic Topcoats – Fast-curing, UV-stable, high-gloss finish

Absolutely—we’ll come to your space to evaluate your floor and recommend the system that best fits your needs.

Using Polycam imaging technology, we capture detailed 2D and 3D models of your space to ensure precise measurements and planning. This also allows us to design customized storage solutions tailored specifically to your garage layout.

During the consultation, we’ll bring a full range of color and system samples so you can see exactly how your finished floor will look.

Every contractor and subcontractor in the business of building or repairing structures must register with the Rhode Island Contractors’ Registration and Licensing Board (RICRLB). You must also carry liability insurance. Barrington Epoxy GC# is 53636